SCHWARZBECK LISN选型指南
- 作者:admin
- 时间:2020-06-24 15:04
- 浏览:
LISN Line Impedance Stabilisation Networks / AMN Artificial Mains Network
A LISN Line Impedance Stabilization Networks / AMN Artificial Mains Network
- supplies the neccessary mains voltage (AC or DC) and current for the Equipment under Test (EuT).
- couples interference voltage generated by the EuT and supplies it to the receiver.
- provides well defined RF-impedance to the Equipment under Test (EuT)
- keeps away unwanted disturbance coming from mains (filter)
- protects the mains from unwanted disturbance voltage generated by the EuT
.
	 
	
	 
Figure 1: Measurement setup conducted disturbances
We can distinguish three types of LISN: V-, T- and Delta-LISN
Figure 2 shows the voltage relationship of a two-line-system with separate ground.
The V-LISN measures the unsymmetric disturbance voltage between the two lines L1 and ground or L2 and ground respectively. V-LISN are also called V-ANM (Artificial Mains Network). The V-LISN is by far the most commonly used LISN.
There are two types of V-LISN with different impedances. The V-LISN with a 5μH inductance (CISPR 16-1-2, CISPR 25, ISO 7637, DO160) are normally used to measure equipment for vehicles, boats and aircrafts connected to onboards mains with DC or 400 Hz. The other Type of V-LISN with 50 µH according to CISPR 16-1-2, MIL STD 461 and ANSI C63.4 is intended to operate at mains frequencies of 50 Hz or 60 Hz.
The T-ISN (Figure 2 right) measures the asymmetric disturbance voltage (common mode voltage) and provides it to an EMI Receiver. T-ISN is normally used for measuring telecommunication and data transmission equipment connected to symmetrical lines as e.g. twisted pairs..
	 
Figure 2: LISN / AN Topology
Schwarzbeck LISN overview
| Type | Topology | Impedance | Current max. | Paths | Options | |
| NSLK 8117 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 2 x 10 A | 2 | 
 | |
| NSLK 8127 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 2 x 16 A | 2 | RC, PLC | |
| NSLK 8126 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 
					2 x 16 A Schuko | 4 | RC | |
| NSLK 8128 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 
					2 x 16 A Schuko and | 4 | RC | |
| NSLK 8163 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 4 x 64 A CEKON | 4 | RC | |
| NNLK 8121 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 4 x 50 (100) A | 4 | RC, Hochstrom, 400/700V, Lüfter | |
| NNLK 8122 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 2 x 50 A | 2 | 
 | |
| NNLK 8129 | V-LISN | 50 µH || 50 Ω | 4 x 200 (300) A | 4 | RC, 400/700 V, Lüfter | |
| NNLK 8129-2 HV | V-LISN | 50 µH || 50 Ω | 2 x 200 (300) A | 2 | RC,TC | |
| NNLK 8130 | V-LISN | 50 µH || 50 Ω | 4 x 400 (500) A | 4 | RC | |
| NNLK 8140 | V-LISN | 50 µH || 50 Ω | 1 x 800 (1000) A | single | 
 | |
| NNHV 8123 | V-LISN | 5µH || 50 Ω | 70 (100) A | single | ||
| NNHV 8123-200 | V-LISN | 5µH || 50 Ω | 200 A | single | 
 | |
| NNHV 8123-400 | V-LISN | 5µH || 50 Ω | 400 A | single | 
 | |
| NNBM 8124 | V-LISN | (5µH + 1 Ω) || 50 Ω | 70 (100) A | single | N-connector | |
| NNBM 8124-200 | V-LISN | (5µH + 1 Ω) || 50 Ω | 200 A | single | N-connector | |
| NNBM 8124-400 | V-LISN | (5µH + 1 Ω) || 50 Ω | 400 A | single | N-connector | |
| NNBM 8124-800 | V-LISN | (5µH + 1 Ω) || 50 Ω | 800 A | single | N-connector | |
| NNBM 8126 A 890 | V-LISN | 5 µH || 50 Ω | 70 (100) A | single | DO-160 | |
| BAN 8508 | 
 | 
 | 8 A (DC) | single | 
 | |
| BAN 8530 | 
 | 
 | 30 A (DC) | single | 
 | |
| NNBL 8225 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 20 A | single | 
 | |
| NNBL 8226 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 70 (100) A | single | 
 | |
| NNBL 8226-HV | V-LISN | (50 µH + 5 Ω) || 50 Ω | 70 (100) A | single | 
 | |
| NNBL 8226-2 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 70 (100) A | 2 | 
 | |
| NNBL 8229-HV | V-LISN | (50 µH + 5 Ω) || 50 Ω | 200 A | single | 
 | |
| NNBL 8230 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 300 A | single | 
 | |
| NNBL 8240 | V-LISN | (50 µH + 5 Ω) || 50 Ω | 800 (1000) A | single | 
 | |
| NTFM 8131 | T-ISN | 150 Ω ± 10% | 3 A (AC) | 2 | 
 | |
| NTFM 8158 | T-ISN | 150 Ω ± 20 Ω | 600 mA DC (pair) | 2 | 
 | |
| CAT5 8158 | T-ISN | 150 Ω ± 20 Ω | 600 mA DC (pair) | 2 | 
 | |
| CAT3 8158 | T-ISN | 150 Ω ± 20 Ω | 600 mA DC (pair) | 2 | 
 | |
| ISN S8 | T-ISN | 
					150 Ω ±20 Ω | 1 A (DC) | 8 | 
 | |
| ISN S1 | T-ISN | 
					150 Ω ±20 Ω | 1 A (DC) | single | 
 | |
| Pilot ISN | 
 | 150 Ω ±20 Ω | 1.4 A DC | 2 | 
 | |
| ECSS LISN1 | 
 | (1.5 µH) || 50 Ω | 10 A | 2 | 
 | |
| ECSS LISN 2 | 
 | (2 µH) || 50 Ω | 10 A | 2 | 
 | |
| ECSS LISN 2 - 75A | 
 | (2 µH) || 50 Ω | 75 A | 2 | 
 | |
| ECSS LISN 3 | 
 | (0.7 µH) || 50 Ω | 10 A | 2 | 
 | |
| NPLC 8500 | V-LISN | 1 Ω | 16 A | single | 
 | |
| PVDC 8300 | 
					PV-LISN | 
					150 Ω common  | 50 A (100 A with opt. fans) | 2 | Fans | |
| PVDC 8301 | 
					PV-LISN | 
					150 Ω common  | 200 A | 2 | 
 | |
| TEMP 8400 | Tempest- V-LISN | 1.4 kΩ | 16 A | 2 | TEMP 8401 | |

